Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 123 / 180

123
Name
Data
length
[byte]
Description Remarks
Character
interval/
character
string width
7
Model type* Setting range [mm]
LP-V10 “000.000”–“090.000”
LP-4x0 “000.000”–“110.000”
LP-4x5/LP-V15 “000.000”–“160.000”
LP-4x1/LP-W “000.000”–“055.000”
• Straight line: gap between adjacent
characters by their respective reference
points
• Proportional: gap between the right end
of a character and the left end of the next
character
• Justify: the total width of character string
Line interval 7
The marking interval to mark the next line is
indicated when the character string is marked
over two or more lines.
Tilt angle 7 “-180.00”–“+180.00” [°]
The tilt angle for character for marking to X
axis is indicated.
Font No. 1
“1”: character font 1
“2”: character font 2 The number corresponding to the 2 fonts
previously registered is indicated.
Bold line width 5
Model type* Setting range [mm]
LP-V10/LP-W “0.000”–“2.000”
LP-4x1/LP-V15 “0.000”–“4.000”
LP-4x0/LP-4x5 “0.000”–“6.000”
Laser power
correction
3 “000”–“200” [%]
• The correction ratio is calculated using the
value set at the laser setting as 100%.
• With LP-400/LP-W series, nothing should
be input in Laser Pulse Cycle Correction.
Scan speed
correction
3 “005”–“500” [%]
(Laser
pulse cycle
correction)
(Only for LP-V
series)
(3) “050”–“200” [%]
* For the detail of the model type, refer to “Target laser marker” (P.8).
2. When marking shape is fan like form
Data length : 83-byte (LP-V series), 80-byte (LP-400/LP-W series)
Name
Data
length
[byte]
Description Remarks
Character
condition No.
2 “01”–“60”
Area No. 1 “0”–“9”, “A”–“F”
Specifies which area part is the marking position
of the concatenated marking on the flying object.
In case of marking static object, specify “0”
Start line 2
“01”–“60” [row]
(“51”–“60”: common setting lines) The start/end line of character string for marking
with this condition is indicated.
End line 2
Marking shape 1
“3”: Fan like form + (Outside arc with
clockwise rotation)
“4”: Fan like form - (Inside arc with
counter-clockwise rotation)
Alignment 1
“0”: left
“1”: center
“2”: right
ME-LP400V-EX-6