Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 104 / 180

104
8. When EAN/UPC and EAN128 (GS1-128) are 1D part of composite code
Data length : 54-byte (LP-V series), 51-byte (LP-400/LP-W series)
Name
Data length
[byte]
Description Remarks
Bar code No. 1 “0”–“7”
Area No. 1 “0”–“9”, “A”–“F”
Specifies which area part is the marking
position of the concatenated marking on
the flying object.
In case of marking static object, specify
“0”.
Code type 2
CC-A Composite 1D part
“46”: EAN/UPC
“47”: UCC/EAN128
“48”: EAN/UPC with human readable text
“49”: UCC/EAN128 with human readable text
CC-B Composite 1D part
“56”: EAN/UPC
“57”: UCC/EAN128
“58”: EAN/UPC with human readable text
“59”: UCC/EAN128 with human readable text
CC-C Composite 1D part
“67”: UCC/EAN128
“69”: UCC/EAN128 with human readable text
System
reservation
1 “0” fixed
Inversion 1
“0”: Do not invert
“1”: Invert
Bar code
height
7
Model type* Setting range [mm]
LP-V10 “001.000”–“090.000”
LP-4x0 “001.000”–“110.000”
LP-4x5/LP-V15 “001.000”–“160.000”
LP-4x1/LP-W “001.000”–“055.000”
Narrow
element
5 “0.050”–“1.000” [mm]
Set the larger value than “Line width” in
laser setting screen.
X position 8
Model type* Setting range [mm]
LP-V10 “-045.000”–“+045.000”
LP-4x0 “-055.000”–“+055.000”
LP-4x5/LP-V15 “-080.000”–“+080.000”
LP-4x1/LP-W “-027.500”–“+027.500”
Specifies the center coordinate of the
code.
Y position 8
Tilt angle 7 “-180.00”–“+180.00” [°]
Quiet/narrow
element W
4 “00.0”–“20.0”
Ratio of quiet width to narrow element
width.
Laser power
correction
3 “000”–“200” [%]
• The correction ratio is calculated using
the value set at the laser setting as
100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse Cycle
Correction.
Scan speed
correction
3 “005”–“500” [%]
(Laser
pulse cycle
correction)
(Only for LP-V
series)
(3) “050”–“200” [%]
* For the detail of the model type, refer to “Target laser marker” (P.8).
ME-LP400V-EX-6