Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 19 / 180

19
1-3-1 DIP switch setting
Set the operational options for the external control with the DIP switch equipped on the controller rear side.
Reference
• The initial setting of all DIP switches is OFF.
• Turn OFF the power at DIP switch setting.
• For the details on DIP switch, refer to Operation/Maintenance manual.
1.
Turn OFF the power of laser marker.
2.
Remove the DIP switch cover on the rear of the controller.
ON
OFF
Rear of controller
LP-400 series LP-V/LP-W series
DIP switch
3.
With DIP switch No. 2, select the control method, I/O or command
for some specific operations.
DIP switch No. 2 Control method for specific operations
ON Control by serial communication commands for the
following operations
• Laser pumping (LSR)
• Shutter control (SHT)
• Guide laser (GID)
• Laser check radiation (SPT)
• Power check (PWR) (LP-V/LP-W series only)
OFF (initial setting) Control by I/O for the following operations
• Laser pumping
• Shutter control
Reference
• “Guide Laser Control”, “Laser Check Radiation” and “Power Check” cannot be controlled by I/O. They can be controlled
only by using serial communication in the remote mode.
ME-LP400V-EX-6