Panasonic LP-400 Series, Руководство по внешнему управлению

Страница: 102 / 180

102
6. For GS1 DataBar Stacked, GS1 DataBar Stacked Omnidirectional
(Including when these codes are 1D part of the composite code.)
Data length : 54-byte (LP-V series), 51-byte (LP-400/LP-W series)
Name
Data
length
[byte]
Description Remarks
Bar code No. 1 “0”–“7”
Area No. 1 “0”–“9”, “A”–“F”
Specifies which area part is the
marking position of the concatenated
marking on the flying object.
In case of marking static object,
specify “0”.
Code type 2
“31”: GS1 DataBar Stacked
“32”: GS1 DataBar Stacked Omnidirectional
“41”: GS1 DataBar Stacked CC-A
“42”: GS1 DataBar Stacked Omnidirectional
CC-A
“51”: GS1 DataBar Stacked CC-B
“52”: GS1 DataBar Stacked Omnidirectional
CC-B
Human readable
text
1
“0”: Invalid
“2”: Valid
Inversion 1
“0”: Do not invert
“1”: Invert
“2”: Invert with guard pattern
Lower bar height
(GS1 DataBar
Stacked)
One bar code
height
(GS1 DataBar
Stacked
Omnidirectional)
7
Model type* Setting range [mm]
LP-V10 “001.000”–“090.000”
LP-4x0 “001.000”–“110.000”
LP-4x5/LP-V15 “001.000”–“160.000”
LP-4x1/LP-W “001.000”–“055.000”
Separator height/
(W)
4 “00.0”–“10.0”
Ratio of separation pattern height to
width in laser setting screen.
Module width 5 “0.050”–“1.000” [mm] Set the larger value than “Line width”.
X position 8
Model type* Setting range [mm]
LP-V10 “-045.000”–“+045.000”
LP-4x0 “-055.000”–“+055.000”
LP-4x5/LP-V15 “-080.000”–“+080.000”
LP-4x1/LP-W “-027.500”–“+027.500”
Specifies the center coordinate of the
code.
Y position 8
Tilt angle 7 “-180.00”–“+180.00” [°]
Laser power
correction
3 “000”–“200” [%]
• The correction ratio is calculated
using the value set at the laser
setting as 100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse
Cycle Correction.
Scan speed
correction
3 “005”–“500” [%]
(Laser pulse cycle
correction)
(Only for LP-V
series)
(3) “050”–“200” [%]
* For the detail of the model type, refer to “Target laser marker” (P.8).
ME-LP400V-EX-6