Olympus Sonic 1200S/HR, Руководство пользователя

Страница: 62 / 154

54 Chapter 4
4.21 Program Sub-Menu
The Sonic
®
1200S/HR is capable of storing and retrieving 100 complete instrument programs.
These setups are recorded with date and time, and may be named using up to 29 alphanumeric
characters. Functions pertaining to program storage are store, recall, erase, name, and print.
PROGRAM This line displays the program storage location which is to be stored, recalled,
erased, named, or printed. Turning the SmartKnob™ will cycle through the 100 program
storage locations and highlight the current selection. The locations are displayed in pages of
16. Along with its storage location, the program’s empty status or name and time stamp will be
displayed.
STORE/RECALL Instrument settings are stored to or recalled from the selected program
location. If the selected location is full, this control allows the operator to recall the stored
program. If the location is empty, the operator is permitted to store the program. Whenever a
program setting is recalled, the currently active instrument settings are overwritten and cannot
be recovered unless these settings were previously stored in another program location.
ERASE The erase function allows the operator to erase the selected program location. This is
normally done before saving a new program to that location. If it is desired to erase all program
settings, the program location must be set to the ALL state. Operator confirmation ENTER is
required to complete the erase operation. Note that this operation is irreversible.
NAME The name function allows the operator to enter a name of up to 29 characters for a
stored program. Names may be used to describe the test settings that are stored, reference a