Olympus Sonic 1200S/HR, Руководство пользователя

Страница: 130 / 154

122 Chapter 6
The enlarged thickness reading is automatically displayed in the numeric display portion of the
screen.
To record a displayed thickness value in the current location, press the T-STORE menu soft
key . Once the reading has been stored, the block location number will be incremented
automatically. The Sonic 1200S will not advance the location number beyond the end of the
block, nor will the Sonic 1200S record the displayed value(s) if they are zero (0).
6.5 Selecting Locations and Reviewing Readings
Any location in the currently selected block number and the value stored in that location can be
selected and viewed from either the SPCL menu or the Data Review sub-menu. From the
instrumentís MAIN menu, the T-STORE location number may be altered using the arrow keys.
The value presently stored in memory is displayed in one of three ways:
EMPTY No measurement has been stored.
X.XXX in (XX.X mm) The value presently stored in the displayed location number.
Stored readings are always displayed in the “as stored unit of measure.” The set using the
UNITS function is in the SPCL menu. The units for the data block are set to the instrument
setting when the block is defined.
To review stored readings from the SPCL menu:
1. Display the SPCL menu.
2. Select the desired location number T-STORE.
3. Observe the stored thickness reading or message.
To review readings from the Data Review sub-menu:
1. Display the Data Review sub-menu SPCL, DATA sub-menu, ENTER, BLOCK #,
ENTER.
2. Select the desired storage location either by the location number or by row and column.
3. The selected stored thickness reading or message will be highlighted.
6.6 Clearing Readings
The value stored in any location in the currently selected block number can be cleared from
Data Logger either from the SPCL menu or the Block Review sub-menu.