NTT docomo FOMA N702iS, Руководство пользователя

Страница: 58 / 480

56
Making/Receiving Phone Calls
Switching V
o
ice
C
a
ll t
o
Vide
opho
ne Ca
ll (C
alle
r)
Switching Voice Call to Videophone Call (Caller)
The caller can switch between voice call and videophone call.
● If the handset of the other party is the FOMA terminal supporting the call switch, “ ” is displayed during the
voice call, and you can switch between the voice call and videophone call. (This function is available in
communications between voice call and videophone call switchable terminals.)
●
You can switch the voice call only when you are the caller.
●
To switch the call, the receiver needs to set “Indicate V-phone” to notify the switch beforehand.
→
P.94
1 In-call screen
d
( ) “YES”
Select “NO” in the “Indicate V-phone” screen to return to the in-call screen.
While the voice call is switched to videophone call, the screen which indicates that the calls are being switched
appears and the voice guidance is played.
N
z
You can switch the videophone call to the voice call. → P.88
z
It is possible to switch repeatedly between voice call and videophone call.
z
It takes about 5 seconds to switch the calls. The signal quality may affect how long it takes.
z
You cannot switch between the videophone and voice calls while talking in the following cases:
・ When “Call waiting” is activated.
・ When the other party is holding a call or activating “Record message”.
z
The call time displayed is reset to 0 second each time the calls are switched. However, after switching, if the videophone call is
finished, the displayed call time is the total of voice call and videophone call.
z
If you try to switch the call, the message appears on the other party’s videophone screen asking to select the image to be sent, camera
image or substitute image. → P.69
z
When the call is switched, the first dialed call is registered to the Redial/Dialed calls records. The first received call is registered to the
Received calls record.
z
If the caller is using packet communication (including i-mode), the packet communication is canceled to switch to videophone.
z
If the other party is using packet communication (including i-mode), you receive the message “No Switch” meaning you cannot switch
the calls. The voice call continues.
z
Depending on the other party’s communication conditions such as manipulation or the signal quality, you may not be able to switch the
calls and the call may be canceled.
z
You are not charged while “SWITCHING VOICE/VIDEO” is displayed.
z
If you perform the switching operation, the amount of call charge displayed in “Call data” (P.313) may differ from the one you will pay.
z
After switching to the videophone call, the hands-free operation turns on or off according to the “Hands-free switch” setting, regardless
of the hands-free setting before switching. → P.94
ＦＵＮＣ
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
Ｃｈａｎｇｅ ＦＵＮＣ
１０ｓ
１７：２３
［Ｃｈａｎｇｉｎｇ］
［Ｃｈａｎｇｉｎｇ］
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
Ｓｅｌｅｃｔ
Ｉｎｄｉｃａｔｅ Ｖ−ｐｈｏｎｅ
Ｃｈａｎｇｉｎｇ？
Ｖｉｄｅｏ−ｐｈｏｎｅ
ＹＥＳ
ＮＯ
４ｓ
１７：２３