NTT docomo FOMA N702iS, Руководство пользователя

Страница: 98 / 480

96
Making/Receiving Videophone
Calls
Se
tt
in
g
Remo
te
Ob
se
rv
a
tio
n
<Remote observation>
Setting Remote Observation
Default setting Other ID: Not recorded Ringing time: 5 sec. Set: OFF
Remote observation is only available between FOMA terminals or between a FOMA terminal and a phone
equipped with a 3G-324M-compatible videophone function. Your FOMA terminal can be used as either the
dialing or receiving phone for remote observation.
●
Remote observation can only be carried out when phone number of the observing (dialing) phone is stored
beforehand in the phone receiving the remote observations and “Remote observation” is set to “ON”.
Preparing the receiving phone
Set the phone number of the dialing phone (Other ID) and the delay until remote observation begins (Ringing
time) on the phone performing the remote observation (receiving phone).
● Up to 5 IDs can be stored.
1
Video-phone settings screen (P.91) “Remote
observation” Enter the security code “Other ID”
The “Other ID screen” appears.
2
“<Not recorded>” Enter the phone number of the other
phone
■ To change a previously stored ID
Select an ID you want to change
3
Press
t
to return to the remote observation screen
4
“Ringing time” Enter the ring time (003 to 120 seconds in 3 digits)
Entering a 3-digit number sets the ringing time.
Press
d
(Set) to set the displayed time.
5
“Set” “ON”
When you set remote observation, “ ” appears in the standby screen.
■ To turn remote observation off
“OFF”
6
Position the FOMA terminal
In remote observation, the image from the front camera
is sent to the dialing phone.
Put the receiving FOMA terminal in the observation
position, ensuring that it is switched on and unfolded.
If the FOMA terminal is left folded, only the voice is sent
and the camera image is not sent. The substitute image
is sent with “Camera Off” written on the image.
N
z
When positioning the FOMA terminal, set “Video-phone” in “Vibrator” to “OFF” to prevent the FOMA terminal from moving when
receiving calls. → P.116
z
The ringing time set for Remote observation cannot be set to the same ringing time for “Record message” or “Automatic answer”.
z
If the ringing time set for “Call forwarding” on the receiver side is shorter than the ringing time set for remote observation, “Call
forwarding” takes priority. To give priority to remote observation, set a shorter ringing time than the “Call forwarding” setting.
Other ID
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
Ｓｅｌｅｃｔ ＦＵＮＣ
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
Ｏｔｈｅｒ ＩＤ
〈Ｎｏｔ ｒｅｃｏｒｄｅｄ〉
Function menu P.97
Front camera
Adjust the angle