NTT docomo FOMA N702iS, Руководство пользователя

Страница: 52 / 480

50
Getting Star
ted
Se
tt
in
g th
e Dat
e
a
nd Time
<Set time>
Setting the Date and Time
You can set the FOMA terminal to correct the date and time automatically or manually.
● After setting the date and time, the date and time you set appear on displays such as standby screen. In addition,
you will be able to use the functions to manage the date and time such as “Alarm clock” and “Schedule”.
● The adjustable range of the date and time is between 00:00 on January 1, 2004 and 23:59 on December 31, 2037.
The date and time will not be updated after 23:59 on December 31, 2037.
●
You can also set the date and time in the “Initial setting” .
→
P.49
1
i31
Select any item:
Auto time set ON …… Corrects the date and time automatically.
When “Auto time set ON” is selected, the time information is retrieved and the date and time are set automatically.
Auto time set OFF
……
Sets the date and time manually. Select this when you want to set the clock with some time
lag.
■ When you select “Auto time set OFF”
Enter the year, month, date and time.
<Example: To set the date and time to October 19, 2006 17:23>
Press
b
to move the highlight, then enter the numbers with the dial keys.
Press
2
,
0
,
0
,
6
,
1
,
0
,
1
,
9
,
1
,
7
,
2
and
3
.
<Caller ID notification>
Notifying the Other Party of Your Phone Number
The FOMA terminal can send your phone number to the other party’s phone when you make a call. Since the
phone number is important information, please take care when you send your caller ID.
● You cannot operate the Caller ID notification service when the “ ” icon is displayed.
● This function is available only when the other party’s phone is capable of displaying the caller ID.
●
If you hear a message requesting your caller ID, hang up the phone. Then set “Activate” to “ON” and make a call
again.
1
i17
Select any item:
Activate
……
Network security code
→
P.140
ON …… Enter the Network security code
OFF …… Enter the Network security code
Status request …… Check the notify caller ID setting “OK”
N
z
When you set the date and time manually, enter the numbers correctly.
z
The date and time you set are retained by the built-in backup battery, so the settings are maintained even when you replace the battery
pack. However, the settings may not be maintained when the battery pack is removed for more than two weeks. To set to “Auto time set
OFF” in this case, reset the date and time after recharging the battery pack. The back-up battery is recharged simultaneously when
the battery pack is recharged.
<Auto time set>
z
The clock of the FOMA terminal is corrected based on the time information from DoCoMo network in the following cases (However,
Auto time set may not be performed depending on the signal condition.):
・ When the FOMA terminal is turned on
・ When the standby screen is displayed and you start recharging without activating other functions
・ When set to “Auto time set ON”
z
The clock is not corrected when the FOMA card is not inserted or when “ ” is displayed.
z
When “i-
α
ppli display” is set, the clock may not be corrected depending on the i-
α
ppli you set.
z
There may occur a time lag for some seconds.
Default setting: OFF Subscription: Unnecessary Monthly charge: Free
Default setting
Auto time set ON
（Ｄａｔｅ）１０／１9
（Ｔｉｍｅ）１７：２３
Ｓｅｔ ｔｉｍｅ
（Ｙｅａｒ） ２ ００６