nord NORDAC SK 200E, Руководство пользователя

Страница: 41 / 180

3 Displays and Control
BU 0200 GB Subject to technical alterations 41
3 SK 200E displays and control
As supplied, without additional options, the diagnostic LEDs are externally visible. These signal the actual
device status. 2 potentiometers and 8 DIP switches are provided in order to set the most important
parameters. In this minimal configuration no other adapted parameters are stored in the plug-in EEPROM.
The only exception is the data concerning operating hours, faults and fault circumstances. This data can be
stored in the EEPROM.
SK 200E mounted on motor, top view SK 200E not fitted, view from inside
RJ12
LEDs
Potentiometers
Plug-in EEPROM

8x DIP switches

All parameters can be conveniently accessed for reading or setting with the aid of an optional SimpleBox or
ParameterBox (Section 3.2). The changed parameter data is stored in a non-volatile EEPROM memory.
This provides the possibility of transferring data from one FI to another by plugging in the EEPROM.
In addition, up to 5 complete frequency inverter data sets can be stored and accessed in the ParameterBox.
Connection between the SimpleBox or ParameterBox is by means of an RJ12-RJ12 cable.