nord NORDAC SK 200E, Руководство пользователя

Страница: 50 / 180

NORDAC SK 200E Manual
50 Subject to technical alterations BU 0200 GB
Functions of the ParameterBox
LCD
Display
Graphic-capable, backlit LCD display for displaying operational values and parameters for the
connected frequency inverter and ParameterBox parameters.
Using the SELECTION
keys
enables toggling between the menu levels and menu items.
Press the and keys together to go back one level.
The contents of individual parameters can be altered with the
VALUES keys.
Press the and keys together to load the default values of the parameter selected.
When controlling the inverter using the keyboard, the frequency setpoint is set using the VALUE keys.
Here the ramp time is limited to 0.17s/Hz, even if small values are set in P002/P003.
OK
Press the
OK key
to change to the selected menu group or accept the changed menu items or
parameter values.
NOTE:
If a parameter is to be exited, without a new value being stored, then one of the
SELECTION keys can be used for this purpose.
If the inverter is currently controlled from the keyboard (not control terminals), then the current actual
frequency can be stored under the Jog Frequency parameter P113 with the OK key and used as the
next initial setpoint frequency.
START key
for switching on the frequency inverter.
NOTE:
These functions can
only be used of they
are enabled in
parameter P509 or
P540.
STOP key
for switching off the frequency inverter.
The direction of rotation of the motor changes when the
DIRECTION key
is
operated. Rotation direction left is indicated by a minus sign.
Attention! Take care when operating pumps, screw conveyors, ventilators, etc.
LEDs
DS
DE
The LED's indicate the actual status of the ParameterBox.
DS – Device State
The ParameterBox is ready for operation.
DE – Device Error
An error has occurred when processing data, or in the FI.
LCD display
205E 1.1kW / 400V
1
Fi/Hz U/V I/A
45.0 360
2.4
ONLINE FI P1 R RUNNING
Frequency inverter type
Connection to frequency
inverter
Frequency inverter status
Frequency inverter
power, voltage
Current operating values
Frequency, voltage,
current
Operating parameter set