NORDAC SK 200E Handbuch
174
Subject to technical alterations BU
0200
GB
8.4 Operation with FI circuit breakers
With SK 200E frequency inverters, leakage currents > 30mA can be expected. If possible, an FI circuit
breaker for the protection of personnel should not be used.
If the frequency inverter is to be used with an FI circuit breaker for the protection of personnel, the leakage
currents to earth must be reduced. For further details, please refer to Section 2.6.4 – 2.6.5. However, due to
the measure “Operation on IT network” the FI loses its specified degree of interference suppression.
8.5 Maintenance and servicing information
In normal use, NORDAC SK 200E frequency inverters are maintenance free. Please note the "general data"
in Section 7.1.
If the frequency converter is being used in a dusty environment, then the cooling-vane surfaces should be
regularly cleaned with compressed air. If air intake filters have been built into the control cabinet, then these
should also be regularly cleaned or replaced.
If you contact our technical support, please have the precise device type (rating plate/display), accessories
and/or options, the software version used (P707) and the series number (rating plate) at hand.
Repairs
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstraße 37
26605 Aurich, Germany
For queries about repairs, please contact:
Getriebebau NORD GmbH & Co. KG
Telephone: 04532 / 401-515
Fax: 04532 / 401-555
If a frequency inverter is sent in for repair, no liability can be accepted for any added components, e.g. such
as mains cables, potentiometer, external displays, etc.!
Please remove all non-original parts from the frequency inverter.
NOTE
If possible, the reason for returning the component/device should be stated. If necessary, at
least one contact for queries should be stated.
This is important in order to keep repair times as short and efficient as possible.
On request you can also obtain a suitable return goods voucher from Getriebebau NORD.
Содержание NORDAC SK 200E
Страница 2: ...NORDAC SK 200E Manual 2 BU 0200 GB...
Страница 35: ...2 Mounting and Installation BU 0200 GB Subject to technical alterations 35...
Страница 60: ...NORDAC SK 200E Manual 60 Subject to technical alterations BU 0200 GB...
Страница 151: ...5 9 Overview of Parameters User defined Settings BU 0200 GB Subject to technical alterations 151...