Motorola DIMETRA MTS 2, Инструкция по установке, настройке и базовому обслуживанию

Страница: 92 / 517

Wall Fixing Chapter 4: Hardware Installation
Wall Fixing
The MTS 4 and Expansion Cabinet have the option of being
fi
xed to a wall for extra stability. To do this, use
the two M6 holes in the back of either the MTS 4 cabinet or the Expansion Cabinet. See Figure 4-11 .
Figure 4-11 MTS – Wall Fixing
Use brackets and screws appropriate for the site wall properties.
Electrical Connections
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Battery backup systems are not manufactured by Motorola. Consult the manufacturer’s
instruction manual and other pertinent documentation for installing battery systems. Any
local regulations shall be adhered to when installing battery equipment.
The equipment cabinet is shipped with all cabling within the cabinet factory-installed. If necessary,
refer to
Chapter 5, "Interconnection and Internal Cabling" , for cabling within the cabinet.
After the station equipment has been mechanically installed, electrical connections must be
made. This involves making the following connections to:
•
Grounding Cables
•
Power Supply Cables
•
Antenna Cables
•
GPS Cables
◦ Remote GPS Receiver Cable
◦ Internal GPS Cable
4-16
6802800U74-N September 2009