Motorola DIMETRA MTS 2, Инструкция по установке, настройке и базовому обслуживанию

Страница: 303 / 517

MTS 2 and MTS 4 Installation, Con
fi
guration and Basic Service Manual MTS - Downloading the Site Controller Con
fi
guration
MTS - Downloading the Site Controller Configuration
Procedure 8-11 MTS - How to Download the Site Controller Configuration
1
Reconnect to the Site Controller and log in.
2
Select Send Files .
3
Select Send Con
fi
guration in Download Type window.
4
Browse to folder containing saved Site Controller con
fi
guration
fi
le.
5
Highlight the
fi
le so its name appears in File name box. Select Open .
6
In File Download Properties window click Use next .
7
Click on Update selected items and enter version label, for example date.
There is no preference on which
fi
les to overwrite if you are prompted to make
a choice.
8
Check + sign item in Use Next column and select OK .
9
Check
fi
les have been sent and con
fi
gured.
10
Enter
attrib
in command prompt and con
fi
rm SC con
fi
g is listed.
11
Type
reset
to exit con
fi
guration mode and close connection when the Site Controller begins its
reset task.
12
Perform site location command by typing
site_location -reset
command.
Enter the command when the command prompt becomes available after the 1st reset
of the Site Controller. You need to be logged in with
fi
eld access.
13
Reconnect either E1 or X.21 link and wait about one minute.
14
Reset the Site Controller again. Check that MTS returns to Wide Area Trunking and no alarms
are active. Type
status sc
.
You need to be logged in with
fi
eld access.
15
If site is con
fi
gured to support SC2 or SC3, the AuC will now report an error, for example:
Decryption failure received on site (12:1). Reprovision necessary
16
Item for site on AuC will be yellow. Return to Process 8-3, "MTS - Restoring the Site Controller
Software," on page 8-23 .
6802800U74-N September 2009
8-27