Motorola DIMETRA MTS 2, Инструкция по установке, настройке и базовому обслуживанию

Страница: 143 / 517

MTS 2 and MTS 4 Installation, Con
fi
guration and Basic Service Manual Recommended Parts
Recommended Parts
Table 4-11 lists the recommended parts for installation. These are not included as part of the MTS shipment
and must be procured locally. All model numbers are Motorola part numbers, unless noted otherwise.
Table 4-11 Recommended Parts for Installation
Part Type/Size Supplier Where Used
Cover or blanket Locally Procured Protection of cabinet
from dust while drilling
Anchor Kit 10 mm Rawl Bolts (concrete
fi
xing bolts)
Locally Procured MTS cabinet
fl
oor
anchors
Grease
anti-oxidant Locally Procured Battery terminal
corrosion control
AC Power Cable
minimum size 1.3 mm
2
(#16 AWG) Locally Procured Mains Supply wiring
AC Power Cable
maximum size 2.1 mm
2
(#14 AWG) Locally Procured Mains Supply wiring
DC Power Cable 3.3 mm
2
(12 AWG) (Length:
more than 3 m)
Locally Procured DC and Backup Battery
wiring
DC Power Cable 5.3 mm
2
(10 AWG) (Length:
more than 3 m)
Locally Procured DC and Backup Battery
wiring
110-240 VAC Connector Motorola P/N 3166502A01 Supplied with MTS AC Mains Connector
-48 VDC Connector MTS 2:
Motorola P/N 3166501A01
MTS4:
Motorola P/N 3166501A02 Supplied with MTS DC Connector Backup
Battery connector
Recommended Torque
Table 4-12 lists the recommended torque for RF connectors, screws, nuts, and bolts.
Table 4-12 Recommended Torque for RF Connectors, Screws, and Nuts
Item Torque Nm Torque lbfin
“N” Coupling Nuts 0.68 – 1.13 6.02 – 10
“SMA” Coupling Nuts
1.0 9
Screws up to M 3.5 0.6 5.31
Nuts up to M 3.5 1.2 for class 80 steel, 0.9 for class 70
steel, and 0.4 for class 50 steel 11 for class 80 steel, 8 for class
70 steel, and 3.5 for class 50 steel
6802800U74-N September 2009
4-67