Motorola DIMETRA MTS 2, Инструкция по установке, настройке и базовому обслуживанию

Страница: 175 / 517

MTS 2 and MTS 4 Installation, Con
fi
guration and Basic Service Manual RF Cabling
RF Cabling
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
RF cabling refers to the cable connections among antenna connectors, the RF Distribu-
tion System (RFDS), and the Base Radios.
RF cabling depends on
fi
lter con
fi
guration.
RF Cabling diagrams and details for different RF con
fi
guration types are presented below:
•
MTS 2 - TX/RX on 1 ant., see Table 5-14 and Figure 5-14
•
MTS 2 - TX/RX on 2 ant., see Table 5-15 and Figure 5-15
•
MTS 4 - TX/RX on 1 ant., see Table 5-16 and Figure 5-16
•
MTS 4 - TX/RX on 2 ant., see Table 5-18 and Figure 5-17
•
MTS 4 - TX on 1 ant., see Table 5-19 and Figure 5-18
•
MTS 4 - TX on 2 ant., see Table 5-20 and Figure 5-19
•
Expansion Cabinet – TX/RX on 1 ant., see Table 5-21
•
Expansion Cabinet – TX/RX on 2 ant., see Table 5-23
•
Expansion Cabinet – TX on 1 ant., see Table 5-24
•
Expansion Cabinet – TX on 2 ant., see Table 5-25
Each con
fi
guration type described by the table and
fi
gure represents a few con
fi
gurations. Not
all Base Radios and not all
fi
lters and associated cables are present in each con
fi
guration.
6802800U74-N September 2009
5-27