Motorola DIMETRA MTS 2, Инструкция по установке, настройке и базовому обслуживанию

Страница: 209 / 517

Chapter
6
Configuration and Testing
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
■
■
The setup and testing procedures covered in this manual are intended to be used in conjunction with
the information provided in
Chapter 13, "MTS Troubleshooting" and “MMI Commands Manual”.
Together, the troubleshooting solutions and testing procedures, provide the necessary information to
isolate failures to a Field Replaceable Unit (FRU) or replaceable part. This helps to keep the system
down time to a minimum by quickly returning the site to normal operation.
All suspected faulty FRUs should be shipped to a Motorola depot facility for servicing or repair.
For a list of available FRUs, see
Appendix A, "Field Replaceable Units (FRUs)" .
Setup and Testing Overview
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
The setup and test procedures in this manual are used to test the functionality of the
MTS and help isolate failures to the module level.
The setup and testing procedures are divided into the following sections:
•
"Preparation"
•
"Site Controller Con
fi
guration and Veri
fi
cation"
•
"CAN Bus Con
fi
guration"
•
"Base Radio Con
fi
guration and Veri
fi
cation"
6802800U74-N September 2009
6-1