Motorola DIMETRA MTS 2, Инструкция по установке, настройке и базовому обслуживанию

Страница: 443 / 517

MTS 2 and MTS 4 Installation, Con
fi
guration and Basic Service Manual Con
fi
guration
Configuration
No con
fi
guration in itself is needed for the module cage, but the Power Supply Unit needs to be
con
fi
gured and this is described in "PSU TrackID Update" on page 11-11 .
Installation and con
fi
guration of additional Base Radios are described separately in "Adding Additional
Base Radio into Existing Module Cage for MTS 4" on page 15-13 .
Furthermore, if an additional Site Controller is ordered as a separate expansion kit, it needs to be
installed and con
fi
gured, see "Adding Redundant Site Controller" on page 15-25 .
Adding Additional Base Radio into Existing Module Cage
for MTS 4
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
This section describes how to add a Base Radio into an existing module cage of the MTS 4.
List of Equipment in the Expansion Kit
When ordering additional base radio to MTS 4 cabinet, the following is included in the expansion kit.
Table 15-3 Equipment in Expansion Kit
Kit number Description Notes
GMTX4325A High Power Base Radio 350 – 380 MHz,
TEDS compatible If such Base Radio exist in current
con
fi
guration.
GMTX4328A High Power Base Radio 380 – 430 MHz,
TEDS compatible If such Base Radio exist in current
con
fi
guration.
GMTF4690A High Power Base Radio 806 – 870 MHz,
TEDS compatible If such Base Radio exist in current
con
fi
guration.
GMTX4321A Low Power Base Radio 380 MHz– 470
MHz If such Base Radio exist in current
con
fi
guration.
GMTX4322A Mid Power Base Radio 380 MHz–470
MHz If such Base Radio exist in current
con
fi
guration.
GMTX4323A Mid Power Base Radio 350 MHz– 430
MHz If such Base Radio exist in current
con
fi
guration.
GMLF4706A High Power Base Radio 806 MHz – 870
MHz If such Base Radio exist in current
con
fi
guration.
6802800U74-N September 2009
15-13