Motorola DIMETRA MTS 2, Инструкция по установке, настройке и базовому обслуживанию

Страница: 315 / 517

MTS 2 and MTS 4 Installation, Con
fi
guration and Basic Service Manual MTS - Site Controller Post-Restoration Checks
Procedure 8-22 MTS - How to Upload the Site Receipts (Remotely Using GSM) (Continued)
4
At this point there will be a telephone number displayed. Edit this number as appropriate for the
Cluster Site you require, once the number is correct select
ENTER and then DIAL .
5
If there is someone at the switch site then they can verify that the KVL connects to the AuC
correctly by monitoring the event log.
6
Allow approximately one minute for the process to complete.
7
Upon completion the AuC event log will display a success message and the KVL will also
acknowledge successful download by emitting an alternating hi/low tone. The call on the cell
phone will be dropped before this success tone is emitted.
8
Check on AuC that icon for site is now green and no errors are reported in the event window
for the site.
9
Check on KVL that site is no longer listed by selecting List and then View .
MTS - Site Controller Post-Restoration Checks
Table 8-10 MTS - Site Controller Post-Restoration Checks
Action Post-Restoration Checks
Ensure no alarms are present on MTS.
Open Zone Watch and check if site's icon is green.
Perform tests as described in "MTS - Site Controller Post - Restoration
Checks" .
MTS restoration -
Restoring the Site
Controller
Make a test call with radio registered on this site and check that radio can
be heard on console. Check on Zone Watch that call is allocated to traf
fi
c
channel on the MTS.
MTS - Site Controller Post - Restoration Checks
Process 8-5 MTS - Site Controller Post - Restoration Checks
1
Test E1 connection. See "MTS - E1 Connection Test" on page 8-40 .
2
Test X.21 connection. See "MTS - X.21 Connection Test" .
3
Test Internal GPS module. See "MTS - Internal GPS Module Test" , or test External GPS
module. See "MTS - External GPS Module Test" .
6802800U74-N September 2009
8-39