F-36 PREPARATION BEFORE STARTING MASS PRODUCTION
9-4-2
Example Program
O0001;
M92 F3.; . . . . . . . . . . . . . . . . . . . . . . . .Start of load teaching or monitoring
G00 T0101;
G97 S1000 M03;
X68.0 Z10.0; . . . . . . . . . . . . . . . . . . . . . A
G01 Z1.0 F2.0; . . . . . . . . . . . . . . . . . . . B
X96.0 Z
13.0 F0.2; . . . . . . . . . . . . . . . . C
Z
43.0; . . . . . . . . . . . . . . . . . . . . . . . . . D
X102.0 Z
46.0; . . . . . . . . . . . . . . . . . . . E
G00 U1.0 Z30.0;
X200.0 Z150.0;
M93; . . . . . . . . . . . . . . . . . . . . . . . . . . .End of teaching or monitoring
M01;
Teaching or monitoring of load is executed for cutting carried out in blocks B, C, D and E.
For the monitoring, data in group 3 is used.
1)
Select the TEACHING mode and execute the program indicated above.
The teaching data is obtained.
2)
Set the threshold level values for the detection of warning and alarm.
3)
After the execution of teaching, execute the program in the MONITORING mode.
Cutting load is monitored based on the set data.
Rapid traverse operation
Cutting feed
1
100
1
70
A
B
C
D
E
F
G
