E-22 SETTING OF COORDINATE SYSTEM
5)
Press the
[(+) INPUT]
soft-key.
<Example>
If stock of removal on the end face is 1.25 mm
a)
Input "1.25" using the data entry keys.
To input the cutting allowance on the end face for
spindle 2, input "
1.25" using the data entry keys.
(S type)
b)
Press the
[(+) INPUT]
soft-key.
1.
If the
(INPUT) key is pressed, the value having been input with data entry keys
is input for the work shift offset data (Z-axis). Therefore, make sure to press the
[(+)
INPUT]
soft-key.
2.
When inputting a numeric value, pay attention to the sign (+,
) and a decimal point
to be input.
3.
To elongate the workpiece length, or to carry out test cutting without actual cutting,
input a negative value.
[numeric value]
[(+) INPUT]
soft-key
To elongate the workpiece length, or to carry out cutting without mounting a
workpiece for spindle 2, input a positive value. (S type)
[numeric value]
[(+) INPUT]
soft-key
GEOM.
WEAR
SET UP
(+)
INPUT
MEASURE
WORK
1
F
10
F
2
F
3
F
4
F
5
F
6
F
7
F
8
F
9
F
1
.
2
5
NOTE
NOTE
INPUT
