SETTING OF COORDINATE SYSTEM E-37
7)
Select the cutting tool which has the largest
overhang using the turret indexing operation.
8)
Bring the tool close to the workpiece manually while
observing the clearance between the workpiece and
the tool through the window in the front door.
When the DOOR INTERLOCK key-switch is
placed in the
RELEASE
position, axis movement
is possible even if the front door is open. In this
case, rapid traverse is restricted to 5 m/min.
9)
With the manual door type machine, press the
DOOR UNLOCK switch
to unlock the front
door. Then open the front door.
With the automatic door type machine, open the
front door by pressing the AUTOMATIC DOOR
OPEN switch.
10)
Check for possible interference when the spindle is
rotated.
<Example>
Interference between the adjacent tools and
chuck (workpiece)
Interference between the fixture and chuck
(workpiece)
11)
After making sure that the spindle can be rotated
without interference, close the front door.
12)
Start the spindle manually, and adjust the spindle
speed as appropriate.
13)
Select the cutting tool which has the largest
overhang and bring it into light contact with the
workpiece end face in the handle feed operation.
Then, move the cutting tool to the position where
position data (X, Z) is an integer.
14)
Press the
(STOP) switch to stop the spindle.
15)
Reset the relative coordinate values on the screen
to "0".
TURRET
NOTE
DOOR UNLOCK
NOTE
NOR
SPJ
STOP
REV
