E-38 SETTING OF COORDINATE SYSTEM
a)
Press the function selection key
(POS).
b)
Press the
[INC.]
soft-key.
The POSITION (INCREMENTAL) screen is
displayed.
c)
Press the
key.
d)
Press the
[ORIGIN]
soft-key.
e)
Press the
key.
f)
Press the
[ORIGIN]
soft-key.
16)
Index the cutting tool for which the offset distance is
to be set using the turret indexing operation.
17)
Repeat steps 8) to 10) and check interference.
18)
After making sure that the spindle can be rotated
without interference, close the front door.
19)
Start the spindle manually, and adjust the spindle
speed as appropriate.
20)
Bring the tool tip into light contact with the workpiece
end face in the handle feed operation.
NETWORK
POS
PROG
SYSTEM
MESSAGE
SETTING
OFFSET
CAPS
CAPS
POS
INC.
ORIGIN
ALL
ABS.
MONI
TOR
PRESET
1
F
10
F
2
F
3
F
4
F
5
F
6
F
7
F
8
F
9
F
A
X
B
Z
TURRET
