PROGRAM EDITING D-15
4.
After inputting a program in the background edit mode, press the
[BG END]
soft-key
to end the background edit mode.
If the
[BG END]
soft-key is not pressed, the program input in the background area
cannot be registered in the foreground area.
5.
Press the
(CAN) key if an error is found in the keyed word or block before
pressing the
(ALTER) key or
(INSERT) key.
6.
To alter or insert a block of data, move the cursor to position where the block is to be
altered or inserted. Key in the new block and press the
(EOB) key. Then press
the
(ALTER) key or
(INSERT) key.
7.
Letter "@" cannot be used in a program.
8.
If "%" code, entered at the end, is included in selected area, copy and move
operation are not possible.
9.
Program editing is not possible in the emergency stop state.
10.
When editing a comment, it is not possible to delete a comment with the cursor
positioned at "(" or ")". Use either of following procedures to delete a comment.
Move the cursor to "(" and press the
(EOB) key then the
(DELETE)
key.
After selecting the comment to be deleted by range selection operation, move
the cursor to any position after ")" and cut the selected comment.
Deletion or alteration of a parenthesis "(" or ")" independently is not allowed.
11.
When the NC screen display function is used at the personal computer side, do not
attempt background editing at the personal computer. If attempted, program editing
and MDI operation are disabled at the NC screen.
12.
When a word is inserted while the cursor is on or one line above the "%" line,
semicolon ";" is appended to the inserted word.
13.
When only a number is keyed in before pressing the
(ALTER) key in the state
the cursor is on the semicolon (;), the keyed in number is appended to the word
immediately before the cursor.
NOTE
CAN
ALTER
INSERT
EOB
;
ALTER
INSERT
EOB
;
DELETE
M6 ;
%
M6 ;
M30 ;
%
M
#
3
0
INSERT
ALTER
3
M6 ;
;
%
M63 ;
%
ALTER
