540
(c) Parameter set flag (buffer memory address: 31740 (7BFC
H
))
Data stored to this buffer memory indicates completion of parameter setting, sends a cyclic start request, and
stores the results of these two operations.
Also, the buffer memory stores the results of the commands above.
• 00
H
: Initial/idle status (stored by the system)
• 01
H
: Parameter setting ended (stored by the user)
• 02
H
: Parameter communication completed (stored by the system)
• 03
H
: Cyclic start being requested (stored by the user)
• FE
H
: Parameter communication failed (stored by the system)
• FF
H
: Cyclic start completed (stored by the system)
(d) Switch setting parameter check result (buffer memory address: 31741 (7BFD
H
))
This buffer memory stores the results of the switch setting parameter check.
• 0: Normal
• 1 or greater: Error (error code)
(e) Parameter communication result (buffer memory address: 31742 (7BFE
H
))
This buffer memory stores the result of parameter communications between the C Controller module and the
master/local module.
• 0: Normal
• 1 or greater: Error (error code)
(f) Setting flag (buffer memory address: 31743 (7BFF
H
))
• For the master station and the submaster station
Use b0 to b2 to set whether to enable each setting data.
Storing "0: Invalid" will operate the station with the default of the parameter. (
Use b3 to set whether to enable the submaster function.
Use b4 and b5 to set whether to enable the IP packet transfer function.
Use b8, b9, and b11 to configure the network operation settings.
Bit
Item
Setting
b0
Network configuration setting data
0: Invalid
1: Valid
b1
Reserved station specification data
b2
Error invalid station setting data
b3
Submaster function
b4 and b5
IP packet transfer function
b8
Data link faulty station setting
0: Clear
1: Hold
b9
Output setting during CPU STOP
0: Hold
1: Clear
b11
Loopback function setting
0: Not used
1: Used
b7
Fixed to 0
to
b3
b4
b5
b6
b2
b1
b0
b15 to
b11
b12
b10
b9
b8
Fixed to 0
b4
0: Disable
1: Enable
Fixed to 0.
b5
Содержание QJ71GF11-T2
