Mitsubishi Electric MR-JE-_A, Инструкция по эксплуатации

Страница: 340 / 370

APPENDIX
App. - 1
APPENDIX
App. 1 Peripheral equipment manufacturer (for reference)
Names given in the table are as of August 2017.
For information, such as the delivery time, price, and specifications of the recommended products, contact
each manufacturer.
Manufacturer Contact information
JST J.S.T. Mfg. Co., Ltd.
3M 3M
Soshin Electric
Soshin Electric Co., Ltd.
App. 2 Compliance with global standards
App. 2.1 About safety
This section explains safety of users and machine operators. Please read the section carefully before
mounting the equipment.
App. 2.1.1 Professional engineer
Only professional engineers should mount MR-JE servo amplifiers.
Here, professional engineers should meet all the conditions below.
(1) Persons who took a proper training of related work of electrical equipment or persons who can avoid risk
based on past experience.
(2) Persons who have read and familiarized himself/herself with this installation guide and operating
manuals for the protective devices (e.g. light curtain) connected to the safety control system.
App. 2.1.2 Applications of the devices
MR-JE servo amplifiers comply with the following standards.
IEC/EN 61800-5-1, IEC/EN 61800-3
App. 2.1.3 Correct use
Use the MR-JE servo amplifiers within specifications. Refer to each instruction manual for specifications
such as voltage, temperature, etc. Mitsubishi Electric Co. accepts no claims for liability if the equipment is
used in any other way or if modifications are made to the device, even in the context of mounting and
installation.
WARNING
If you need to get close to the moving parts of the machine for inspection or
others, ensure safety by confirming the power off, etc. Otherwise, it may cause an
accident.
It takes 15 minutes maximum for capacitor discharging. Do not touch the unit and
terminals immediately after power off.