Mindray BC-2800, Руководство оператора

Страница: 278 / 286

Appendices
E-4
and V
„ Message description unit
Field
name
Coding Description
CTR
Data package of normal analysis
results
QCR Data package of QC running
MD
QCC Data package of QC standard
Programming
The BC-2800 must communicate with the external computer when the Handshake is on in
following procedures:
1. During the communication connection, the BC-2800 sends an ENQ (10 Hex), then waits
up to 4 seconds for the external computer to respond. If the external computer does not
respond, then one more ENQ (10 Hex) is tried. If it fails again, the analyzer aborts the
transmission and reports a transmission error;
2. The external computer must respond by sending an ACK (06 Hex);
3. After the ACK (06 Hex) is received, the analyzer then sends data block;
4. After the sending, the BC-2800 sends an ETX (0F Hex), then waits 4 seconds for the
external computer to respond. If no response is received, one more ETX (0F Hex) is sent.
The BC-2800 waits 4 seconds before giving up and gives alarm of communication error.
E.3.2 Sample Data format
„ FD field
FD definition of analysis parameter
FD Description
Sample information
SampleID Sample ID
Mode Analysis Mode (0:whole blood-all parameter; 1: predilute-all parameter;
2: whole blood- WBC/HGB; 3: predilute - WBC/HGB; 4: whole
blood-RBC/PLT; 5: predilute - RBC/PLT)
TestTime Test time, format: YYYY-MM-DD HH: MM: SS (if the digit is less than
10, add a 0 at the ten’s place)
Name Name