DLZ CREATOR ADAPTIVE DIGITAL MIXER FOR PODCASTING AND STREAMING, FEATURING MIX AGENT™ TECHNOLOGY
9
Chapter 2 : DLZ Creator Rear Panel Features
Introduction
From left to right, the rear panel of each DLZ Creator is outfitted with a power
connector and power switch, a microSD card slot, a multi-purpose USB-A jack,
a network connector, a USB-C port for connecting to a computer, an 1/8" stereo
input jack, four 1/4" headphone jacks, 1/4" L/R output jacks, 1/4" L/R stereo input
jacks and last but not least... four combo input jacks. Let’s take a look at each
of these features, starting on the left with the power connector and power switch,
followed by a look at the inputs, outputs and the rest.
Power Connector
The DLZ Creator has a universal external power supply that accepts any AC voltage
ranging from 100 VAC to 240 VAC. No need for voltage select switches. It will work
virtually anywhere in the world. That’s why we call it a “Planet Earth” power supply!
It is less susceptible to voltage sags or spikes compared to conventional power
supplies, and provides greater electromagnetic isolation and better protection
against AC line noise.
An external 18V DC power supply [aka The Power Block] and a line cord are included
with the DLZ Creator. A locking barrel connector resides at the end of the cord attached
to The Power Block. Attach it to the power connector on the DLZ Creator and rotate the
outer ring clockwise to lock. Do not over-tighten! Screw until there is resistance, then
stop. Connect the female end of the line cord to The Power Block and plug the male end
into a live grounded outlet. An LED on The Power Block will illuminate blue to indicate
success (whether the DLZ Creator is powered on or not).
Warning
: Disconnecting the plug’s ground pin is dangerous. Don’t do it!
In fact, it’s a bad idea to remove anything from (or add anything to)
The Power Block or line cord. Again, don’t do it!
The
Power
Block
Barrel Connector
Locking Outer Ring