Lufft 8511.EAK, Руководство по эксплуатации

Страница: 60 / 158

hseIceSight.hseIceSightTable.hseIceSightEntry.hseIceSightSfcDirtyLens.X .1.3.6.1.4.1.1206.3.51.4.1.2.1.7.X
5.8.3.3 iso.org.dod.internet.private.enterprises.nema.transportation.devices.tss
All traffic sensor/measure values are reported under this subtree (if “Support TSS” is active). Following list shows all objects (OIDs) as
defined by the NTCIP standard for TSS (1209_V0119f.pdf).
•
OIDs which represent measurements are shown in bold .
•
OIDs which represent configuration elements are shown in gray .
•
OIDs which are “deprecated” or only relevant to “staffed” or “mobile” stations and are not shown by default are shown in
italics .
•
OIDs (or subtrees) which are NOT supported are shown underlined.
The “Source Sensor Assignment” column shows which sensor/measurement type should be assigned to this OID (in which
format/unit), and where appropriate which conversion/scaling should be configured in the LCom sensor configuration, before the
measurement is processed in the NTCIP section of the LCom. A scaling is stored in the NTCIP sensor configuration for each OID
(independent of any possible scaling/value mapping in the LCom sensor configuration), which usually converts the unit delivered by
the UMB sensor channel (e.g. km/h) to the encoding required by the NTCIP standard (e.g. 1/10km/h).