Lufft 8511.EAK, Руководство по эксплуатации

Страница: 17 / 158

Note: If you want to set up several LCOMs with an identical sensor configuration, you
can use the "device_data.txt” and “sensor_data.txt” files to transfer this configuration
to other devices. In this case it is best to install these files in the \FFSDISK directory
before starting LCom. The TLS and MSSI configuration data for the sensors is also
stored in the “sensor_data.txt” file.
5.3 User Interface
Only the first two dialogs
, “Status Display” and “Log File”, are generally available. A
user name and password is required for all other dialogs.
User name: lufft
Password: lufft-lcom
The user
is “logged out” if the screensaver is enabled.
Note: the screensaver function in LCom disables the LCD backlight after a
configurable amount of time without user interaction (see System Dialog). The
backlight is re-enabled (switched on) if the touch screen is touched, or a mouse
button is pressed.
As it may happen that the backlight does not start properly when it is re-enabled, the
backlight is reset (switched off and on again) if the touch screen (or the mouse
button) is continuously pressed for more than 5 seconds.