LiteOn EVO 6800 Series, Руководство пользователя

Страница: 139 / 261

139
its hundreds digit 1 can be realized
EX: select operation mode for the NC, the parameter can be set to 100.
Setting Function Setting Function
0 During Run 29 Mechanical Weakening Detection (Normal
Open)
1 Zero Speed Holding 30 Retain
2 Frequency (Speed) Agree 31 Retain
3 User-Defined Frequency (Speed ) Agree 32 Retain
4 Drive Ready 33 Retain
5 Uv (Undervoltage) Detection 34 Retain
6 During Baseblock 35 During Frequency Output
7 Retain 36 Drive Enabled
8 Frequency Command Source 37 Watt Hour Pulse Output
9 Frequency Command Loss 38 Local/Remote Mode
10 Run Command Source 39 During Speed Search
11 Fault 40 PID Feedback Low
12 Communication Mode 41 PID Feedback High
13 Alarm 42 During KEB Operation
14 Fault Restart 43 Retain
15 Timer Output 44 During Fast Stop
16 Frequency (FOUT) Detection 1 45 Retain
17 Frequency (FOUT) Detection 2 46 Rotor Position Detection Complete
18 Overvoltage/Undervoltage Detection 1 47 Retain
19 Retain 48 Retain
20 Overvoltage/Undervoltage Detection 2 49 Brake Control (Desired frequency attained)
21 Retain
100 to
149
0 to 49 with Inverse Output
22 During Reverse
23 Motor 1/ 2 Selection
24 During Regeneration
25 Restart Enabled
26 Motor Overload Pre-Alarm (oL1)
(Including oH3)
27 Drive Overheat Pre-Alarm (oH)
28 Retain
0 : During Run
When the drive is outputting voltage, the output terminal closes.