Lenovo x3650 M4 BD 5466, Инструкция по установке и обслуживанию

Страница: 259 / 1222

Figure 159. Bezel installation
Step 1. Read the safety information that begins on “Safety” on page v and “Installation guidelines”
on page 34.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3. Insert the tabs on the bottom of the bezel into the slots on the underside of the chassis and attach
it with the screws.
Step 4. Connect any cables you previously removed from the front of the server.
Removing the 240 VA safety cover
Use this information to remove the 240 VA safety cover.
To remove the 240 VA safety cover, complete the following steps:
Step 1. Read the safety information that begins on “Safety” on page v and “Installation guidelines”
on page 34.
Step 2. Turn off the server, and disconnect all power cords and external cables.
Step 3. Remove the cover (see “Removing the cover” on page 240).
Step 4. Remove the screw from the safety cover.
Chapter 6
.
Removing and replacing components
247