0
0
0
0
00
00
00
00
00000
00
00
000000000000
00
0
00
0
00
0
00
0
00
0
00
0
00
0000
0000
0000
0000
00
00
0000
0000
00
000000000000000
000000000
000000000000000000
0
0
0
0
0
0
000
000000000000000000
0
0
0
0
0
0
000
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
21
20
19
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
2
1
0
3
4
5
SATA/SAS hard disk drive bays
SATA/SAS hard disk drive bays
Figure 119. Server with sixteen 2.5-inch hard disk drives and six 3.5-inch hard disk drives
The following notes describe the types of drives that the server supports and other information that you
must consider when installing a drive:
• Make sure that you have all the cables and other equipment that is specified in the documentation that
comes with the drive.
• Check the instructions that come with the drive to see whether you have to set any switches or jumpers
on the drive. If you are installing a SAS or SATA device, be sure to set the SAS or SATA ID for that device.
• Optional external tape drives and DVD-ROM drives are examples of removable-media drives. You
can install removable-media drives only in bays 1 and 2 on models with six 3.5-inch, eight, sixteen,
twenty-four, and thirty-two 2.5-inch hard disk drives.
• The electromagnetic interference (EMI) integrity and cooling of the server are protected by having all bays
and PCI slots covered or occupied. When you install a drive or PCI adapter, save the EMC shield and filler
panel from the bay or the PCI adapter slot cover in the event that you later remove the drive or adapter.
• For a complete list of supported options for the server, see http://www.lenovo.com/ serverproven/.
Removing a 2.5-inch hot-swap hard disk drive
Use this information to remove a 2.5-inch hot-swap hard disk drive.
Attention:
Static electricity that is released to internal server components when the server is powered-on
might cause the server to halt, which might result in the loss of data. To avoid this potential problem,
always use an electrostatic-discharge wrist strap or other grounding system when you work inside the
server with the power on.
Read the safety information in “Safety” on page v and “Installation guidelines” on page 29.
Removing and replacing components
199
Содержание System x3500 M5 Type 5464
