Lenovo System x3500 M5 Type 5464, Инструкция по установке и обслуживанию

Страница: 307 / 1236

Step 9. Remove the dust covers from the microprocessor sockets of the new system board and place
them on the microprocessor sockets of the old system board that you just removed.
If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Attention: Make sure to place the socket cover for the microprocessor socket on the system board before
returning the system board.
Installing the system board
Use this information to install the system board.
Notes:
1. When you reassemble the components in the server, be sure to route all cables carefully so that they are
not exposed to excessive pressure.
2. When you replace the system board, you must either update the server with the latest firmware or
restore the pre-existing firmware from a diskette or CD image. Make sure that you have the latest
firmware or a copy of the pre-existing firmware before you proceed. See “Updating the firmware”
on page 103, “Updating the Universal Unique Identifier (UUID)” on page 119, and “Updating the
DMI/SMBIOS data” on page 121.
3. When you replace the system board, make sure that you remove the Integrated Management Module II
(IMM2) Advanced Upgrade and place it on the new system board. For information about the Advanced
Upgrade, see “Using the remote presence and blue-screen capture features” on page 113
4. Reactivate any Features on Demand features after replacing the system board. Instructions for
automating the activation of features and installing activation keys is in the Lenovo Features on Demand
User's Guide . To download the document, go to https://fod.lenovo.com/lkms, log in, and click Help .
Read the safety information in “Safety” on page v and “Installation guidelines” on page 29.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To install the system board, complete the following steps.
Step 1. Touch the static-protective package that contains the system board to any unpainted metal surface
on the server; then, remove the system board from the package.
Step 2. Align the guide pins and the alignment pins on the chassis with the holes on the system board.
Chapter 6
.
Removing and replacing components
291