Lenovo System x3500 M5 Type 5464, Инструкция по установке и обслуживанию

Страница: 203 / 1236

Bezel
Figure 107. Bezel installation
Step 4. Swing the bezel to close it.
Step 5. Lock the left-side cover and the bezel door
Replacing the stabilizing feet
Use this information to turn the stabilizing feet.
Read the safety information in “Safety” on page v and “Installation guidelines” on page 29.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To replace the stabilizing feet, complete the following steps.
Step 1. Turn off the server and peripheral devices, and disconnect the power cords and all external cables.
Step 2. Carefully turn the server on its side so that it is lying flat, with the cover facing up.
Attention: Do not allow the server to fall over.
Step 3. Carefully position the server on a flat surface, with the feet hanging over the edge of the flat surface
to ease removal.
Step 4. Press in on the tab that hold the feet in place; then, swing the feet away to be released one by
one from the server.
Chapter 6
.
Removing and replacing components
187