Select this choice to view or configure Trusted Platform Module (TPM) support.
–
Integrated Management Module II (IMM2)
Select this choice to view or change the settings for the Integrated Management Module II (IMM2).
–
Power Restore Policy
Select this choice to set the mode of operation after the power lost.
–
Commands on USB Interface
Select this choice to enable or disable the Ethernet over USB interface on IMM2.1. The default
is
Enable
.
–
Network Configuration
Select this choice to view the system management network interface port, the IMM2.1 MAC
address, the current IMM2.1 IP address, and host name; define the static IMM2.1 IP address, subnet
mask, and gateway address, specify whether to use the static IP address or have DHCP assign the
IMM2.1 IP address, save the network changes, and reset the IMM2.1.
–
Reset IMM2.1 to Defaults
Select this choice to view or reset IMM2.1 to the default settings.
–
Reset IMM2.1
Select this choice to reset IMM2.1.
–
Recovery
Select this choice to view or change the system recovery parameters.
–
POST Attempts
Select this choice to view or change the number of attempts to POST.
•
POST Attempts Limit
Select this choice to view or change the Nx boot failure parameters.
–
System Recovery
Select this choice to view or change system recovery settings.
•
POST Watchdog Timer
Select this choice to view or enable the POST watchdog timer.
•
POST Watchdog Timer Value
Select this choice to view or set the POST loader watchdog timer value.
•
Reboot System on NMI
Select this choice to enable or disable restarting the system whenever a nonmaskable interrupt
(NMI) occurs.
Enable
is the default.
•
Halt on Severe Error
Select this choice to enable or disable the system from booting into OS, displaying the POST
event viewer whenever a severe error was detected.
Disable
is the default.
–
Storage
Select this choice to view or change the storage device settings.
–
Network
Select this choice to view or change the network device options, such as iSCSI.
–
Drive Health
Select this choice to view the status of the controllers installed in the blade server.
•
Date and Time
Configuration information and instructions
109
Содержание System x3500 M5 Type 5464
