Lenovo System x3500 M5 Type 5464 Скачать руководство пользователя страница 396

Страница: 396 / 1236

3. Make sure that the heat sink for microprocessor n.

4. (Trained technician only) Replace system board.

•

80010701-1406xxxx : Numeric sensor [NumericSensorElementName] going high (upper

non-critical) has asserted. (DIMM GH VR Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has asserted.

May also be shown as 800107011406xxxx or 0x800107011406xxxx

Severity

Warning

Serviceable

Yes

Automatically notify support

Alert Category

Warning - Temperature

SNMP Trap ID

CIM Information

Prefix:

PLAT

ID:

0490

User Response

1. Make sure that the fans are operating, that there are no obstructions to the airflow (front and

rear of the server), that the air baffle is in place and correctly installed, and that the server cover
is installed and completely closed.

2. Check the ambient temperature. You must be operating within the specifications (see Server

Features and specifications for more information).

3. Make sure that the heat sink for microprocessor n.

4. (Trained technician only) Replace system board.

•

80010701-2d01xxxx : Numeric sensor [NumericSensorElementName] going high (upper

non-critical) has asserted. (PCH Temp)

This message is for the use case when an implementation has detected an Upper Non-critical sensor
going high has asserted.

May also be shown as 800107012d01xxxx or 0x800107012d01xxxx

Severity

Warning

Serviceable

Yes

380

System x3500 M5 Installation and Service Guide

Содержание System x3500 M5 Type 5464





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание System x3500 M5 Type 5464

Отзывы:

Бренды по названию

Популярные бренды

Lenovo System x3500 M5 Type 5464, Инструкция по установке и обслуживанию

Результаты поиска

Содержание System x3500 M5 Type 5464

Отзывы:

Бренды по названию

Популярные бренды