Lenovo System x3500 M5 Type 5464, Инструкция по установке и обслуживанию

Страница: 77 / 1236

Note: In order to ensure that the tape drive can eject smoothly and avoid damage, remove the bezel filler.
See Figure 35 “Remove the bezel filler” on page 49.
If you have replaced a server component or installed an optional device in the server, you need to reconnect
the power cords and all external cables, and turn on the server and peripheral devices.
Hard disk drive installation
The following illustrations show the location of the drive bays in the server. Your hardware might differ,
depending on the model.
Depending on the server model, the server might come with a SATA attached DVD-ROM drive in bay 1.
Note: If the server is configured for RAID operation using a ServeRAID adapter, you might have to
reconfigure your disk arrays after you install drives. See the ServeRAID adapter documentation for additional
information about RAID operation and complete instructions for using the ServeRAID adapter.
The following illustrations show the location of the drive bays in the 2.5-inch hot-swap hard disk drive
server models.
0
0
0
0 0
0
0
0 00
00
00 0000 00
00 0000 0000 0000 0000 0000 00
0
1
2
3
4
5
6
7
SATA/SAS hard disk drive bays
Figure 50. Server with eight 2.5-inch hot-swap hard disk drives
Chapter 2
.
Installing optional devices
61