background image

 Dear User of Inspur Yingxin Server ,

 

Heartfelt thanks to you for your use of Inspur Yingxin server.
This manual introduces the technical characteristics, the system instal-

lation and setup of the server to help you fully understand and expediently 
use this server.

Please deliver the package of our product to the waste recycling station 

for recycling, in favor of pollution prevention and humankind’s bene

fi

 t.

This manual is the property of the Inspur Group Co., Ltd.
This User Manual is not to be copied by any group or person in any 

manner without the consent of Inspur Group Co., Ltd. The Inspur Group 
Co., Ltd. reserves the right of revising this manual momentarily.

Any alteration about the content of this manual will not be noticed.
Please contact Inspur Group Co., Ltd. if you have any questions or ad-

vice about this manual.

           

                                                                                         Inspur Group Co., Ltd.
                                                                                                 August, 2011

“Inspur” is registered trademark of the Inspur Group Co., Ltd.
Other trademarks belong to other corresponding registered companies.

Summary of Contents for NF5220















































































Reviews: