
ML62Q1000 Series User's Manual
Chapter 4 Power Management
FEUL62Q1000
4-24
4.3.5 STOP-D Mode
The STOP-D mode has, in addition to the functionality of the STOP mode described in the previous section, an
additional control function to decrease the voltage of internal logic power (V
DDL
). The current consumption can be
further reduced due to lowering of the V
DDL
voltage. See section "4.3.7 Operation of Each Function in Standby Mode"
for the operation of each function in the STOP-D mode.
See Table 4-5 for a comparison of time for restoring (start-up time) from STOP and STOP-D modes.
To enter the STOP-D mode, write "0x5n" then "0xAn" (n = arbitrary) to the STPACP register to enable the transition to
the STOP/STOP-D mode, then write "1" to the STPD bit of the SBYCON register.
The STOP-D mode is released by the external interrupts, voltage level supervisor (VLS) or interrupt requests from the
analog comparator. It returns to the program run mode with the SYSTEMCLK chosen before entering the STOP-D
mode.
Figure 4-6 shows the STOP-D mode operation waveforms of the low-speed oscillation circuit.
Figure 4-7 shows the STOP-D mode operation waveforms of the PLL oscillation circuit.
Figure 4-6 STOP-D Mode Operation Waveforms of Low-Speed Oscillation Circuit
Figure 4-7 STOP-D Mode Operation Waveforms of PLL Oscillation Circuit
SYSTEMCLK
SBYCON.STPD bit
LSCLK
Program run mode
STOP-D
mode
Program run mode
Interrupt
Low-speed oscillation
waveform
SBYCON : Standby control part register
T
RTCPU
: CPU clock wakeup time (see Table 4-5)
T
RTCPU
SYSTEMCLK
SBYCON.STPD bit
HSCLK
Program run mode
STOP-D
mode
Program run mode
Interrupt
PLL oscillation
waveform
SBYCON : Standby control part register
FHWUPT : High-speed clock wakeup time setting register
See Chapter 6 "Clock Generation Circuit" for details of FHWUPT.
T
RTCPU
: CPU clock restoring time (see Table 4-5)
T
RTCPU
Содержание ML62Q1000 Series
