Lake Shore Model 321 Autotuning Temperature Controller User’s Manual
Installation
2-1
CHAPTER 2
INSTALLATION
2.0 GENERAL
This chapter provides general installation instructions for the Model 321 Autotuning Temperature
Controller. Inspection and unpacking instructions are provided in Paragraph 2.1. Repackaging for
shipment instructions are provided in Paragraph 2.2. A definition of rear panel controls is provided in
Paragraph 2.3. Environmental requirements are detailed in Paragraph 2.4. Grounding and shielding
requirements are discussed in Paragraph 2.5. Sensor input settings are detailed in Paragraph 2.6.
Sensor installation recommendations are detailed in Paragraph 2.7. Sensor curve selection is detailed
in Paragraph 2.8. The Precision Calibration Option is discussed in Paragraph 2.9. Heater setup is
detailed in Paragraph 2.10. Rack mounting is discussed in Paragraph 2.11. Finally, the power up
sequence, configuration, and errors are provided in Paragraph 2.12.
2.1 INSPECTION AND UNPACKING
Inspect shipping containers for external damage. All claims for damage (apparent or concealed) or
partial loss of shipment must be made in writing to Lake Shore within five (5) days from receipt of
goods. If damage or loss is apparent, please notify the shipping agent immediately.
Open the shipping containers. A packing list is included with the system to simplify checking that the
instrument, sensor, accessories, and manual were received. Please use the packing list and the spaces
provided to check off each item as the instrument is unpacked. Inspect for damage. Be sure to
inventory all components supplied before discarding any shipping materials. If there is damage to the
instrument in transit, be sure to file proper claims promptly with the carrier and insurance company.
Please inform Lake Shore of such filings. In case of parts or accessory shortages, advise Lake Shore
immediately. Lake Shore cannot be responsible for any missing parts unless notified within 60 days of
shipment. The standard Lake Shore Warranty is included on the A Page (immediately behind the title
page) of this manual.
2.2 REPACKAGING FOR SHIPMENT
If it is necessary to return the Model 321, sensor, or accessories for repair or replacement, a Return
Goods Authorization (RGA) number must be obtained from Technical Service in the United States, or
from the authorized sales/service representative from which the product was purchased. Instruments
may not be accepted without a RGA number. When returning an instrument for service, the following
information must be provided before Lake Shore can attempt any repair.
1. Instrument model and serial number.
2. User name, company, address, and phone number.
3. Malfunction
symptoms.
4. Description of system.
5. Returned Goods Authorization (RGA) number.
Wrap instrument in a protective bag and use original spacers to protect controls. Repack the system in
the LSCI shipping carton (if available) and seal it with strong paper or nylon tape. Affix shipping labels
and FRAGILE warnings. Write the RGA number on the outside of the shipping container or on the
packing slip.
