Kurzweil PC3K6, Руководство музыканта

Страница: 262 / 381

11-12
Master Mode
OBJECT
Replacing Default General MIDI Programs
The PC3K’s GM sounds consist of PC3K programs tailored to work well in all GM sequences,
but you can also edit or exchange these programs to suit your taste. The PC3K provides you
with a GM sound set editor which allows you to replace the PC3K’s default GM programs with
any other PC3K factory or user created program. For example, you could choose a different
factory or user created piano program to replace the default GM program 1, Ac Grand Piano.
This way, any GM sequence that uses GM program 1 would now use the new piano program
that you selected. Alternatively, you could even choose a different instrument to replace the
default GM program 1, such as PC3K program 47 Harpsichord. This way, any GM sequence that
uses GM program 1 would now use the new harpsichord program that you selected. Using a
PC3K program that does not resemble the instrument named in the current GM program would
technically make the PC3K incompatible with GM, but some users may want to do this as a way
to “remix” GM sequences.
It is easy to replace default GM programs in order to make a custom GM sound set. Once in GM
mode, the right side of Program Mode screen displays a list of the GM programs with their
standard GM names. The left side of the screen shows you what PC3K program is being used for
the selected GM program. Pressing left on the cursor moves you to this field. Use the cursor’s
up/down buttons, the alphanumeric pad, the plus/minus buttons, or the alpha wheel if you wish
to select a different PC3K program for the current GM program. Don’t use the program or
category buttons because these will change the currently selected GM program. The newly
selected PC3K program will be used by the current GM program, though the name of the GM
program will not change. To save these settings you must save the master table (see Save below.)
Saved settings can be recalled after powering off or leaving GM mode. To restore GM mode’s
factory selected programs, press the Reset soft button (see below.)
OBJECT
Pressing the OBJECT soft button calls up the Objects page (see below.) From here you can choose
one of two utility functions for renaming or deleting selections of user created (or edited)
objects. Press the Rename or Delete soft button to access each function.
Rename
The Rename utility allows you to rename an object without entering the object’s editor. The
Rename page shows a list of all user created objects, grouped by object type (see below.) Use the
alpha wheel or plus/minus buttons to select an object from the list. Press Rename to bring up the
object Rename screen and enter a new name by following the standard renaming procedure. For
more information, see Saving and Naming on page 5 ‐ 3.