Kurzweil PC3K6, Руководство музыканта

Страница: 123 / 381

Program Mode
The PERC2 Page
6-65
Harmonic
This parameter switches between high and low harmonic percussion settings. The actual pitch is
controlled by the LowHarm and HighHarm parameters. On keyboard models, you can toggle
between low and high harmonics by pressing Assignable Controller Button 8 ( Mute button 8 ).
VelTrack
Here is where you specify the degree to which key velocity controls percussion volume. A value
of zero corresponds to no velocity tracking, which is like a real tone wheel organ. Other values
add velocity tracking, so that increased velocity results in louder percussion.
LowHarm
Controls which drawbar is used as the basis for the percussion when Harmonic is set to Low . On
an actual tone wheel organ, this is Drawbar 4 (2nd harmonic). The actual pitch obtained
depends on the drawbar tuning.
HighHarm
Controls which drawbar is used as the basis for the percussion when Harmonic is set to High .
On an actual tone wheel organ, this is Drawbar 5 (3rd harmonic). The actual pitch obtained
depends on the drawbar tuning.
StealBar
Controls which drawbar is disabled when the percussion effect is turned on. On an unmodified
tone wheel organ, the ninth drawbar is the one disabled. Any drawbar can be selected.
The PERC2 Page
PercLevel, DecayTime, OrgLevel
With these parameters you can control the amplitude and decay time of the percussion effect for
all combinations of the Volume and Decay parameters (on the PERC1 page). You can also adjust
the level of the organ relative to the percussion, for accurate emulation of classic organs.
Parameter Group (Available for each combination of
the Volume and Decay parameters on the PERC1 page)
Range of Values
Percussion Level 0 to 24.0 dB
Decay Time 0.01 to 5.10 seconds, in 0.02-second increments
Organ Volume Level -12.0 to 12.0 dB