Kurzweil PC3K6, Руководство музыканта

Страница: 208 / 381

9-2
Effects
Basic Overview
Note that when an Aux Effect is applied post ‐ Insert, the wet Aux signal has a series of effects
applied to it—i.e., cascaded effects. When an Aux Effect is applied pre ‐ Insert, the wet Aux signal
has no Insert effect applied to it, and the final output has parallel effects—i.e., distinct effects.
For multitimbral use—i.e., multiprogram use—multiple programs can have their Insert Effects
loaded simultaneously. The Aux Effects are global, and there can be only one set (Aux 1 and
Aux 2) loaded at a time. In Program mode, the Aux Effects come from the program loaded on
the current selected channel. In Song and Setup modes, there is an option to select the track or
zone whose program specifies the Aux Effects. Alternatively, the Aux Effects can be set directly
on the AUXFX1 and AUXFX2 pages in Song or Setup mode, or by using the Effect button in
Program mode. The following figure shows the signal paths for a multitimbral setup or song:
Processor Power Allocation
Each Effect Chain is composed of an effect ‐ box or a series of effect ‐ boxes. Each effect ‐ box uses a
certain amount of the PC3K’s effects processing power. The amount of processing power used
by an effect ‐ box or Chain reflects how complex the effect’s algorithm is—more complex effects
require more processing power. Accordingly, each Chain and effect ‐ box uses a certain number
of “DSP units”—you can have up to 16 DSP units used at a time.
In Program mode, the programs loaded on each of the 16 MIDI channels are normally
considered active, so effects are loaded for as many as is possible. In addition to a pair of Aux
Effects (whether they are the program’s or the overrides in Effects mode ‐ more on this later), the
Insert Effect of each channel’s program is active. For the DSP units, the currently selected
program will have priority, followed by lowest to highest MIDI channel. You can have up to 11
active Insert Effects.
Insert Program
Pre Post
Send Levels
Chain
Insert
Program
Pre Post
Send Levels
Chain
ZONE/TRACK 1
ZONE/TRACK 2
Etc.
²
²
AUX 2 Chain
AUX 1 Chain
²
Comp EQ
EQ Comp
Output
Master FX Order