Kurzweil PC3K6, Руководство музыканта

Страница: 170 / 381

7-40
Setup Mode
The RIBBON Page
The RIBBON Page
The RIBBON page lets you define the controller assignment for the PC3K’s ribbon controller.
The optional Ribbon controller senses movement when you press on it and move your finger left
or right; this creates numerous possibilities for controlling pitch, volume, panning, crossfades
between zones, or any other uses you might imagine.
The optional Ribbon controller can be used as a single long controller, or it can be divided into
three separate sections, each with its own controller assignments (this is done on the RIBCFG
page, see below). The two small arrows above the strip indicate the boundaries of the three
sections. The large arrow above the ribbon points to the center of the ribbon, for when the ribbon
is configured in one section.
Note that there are three assignable parameter groups on the RIBBON page. When the Ribbon is
set to act as a single section controller, the only parameters that affect its behavior are those of
Section 1 (Sect1). When the Ribbon is set to act as a three ‐ section controller, each parameter
group affects only its respective Ribbon section.
To modify other ribbon parameters, go to the The Ribbon Configuration (RIBCFG) Page below.
The RIBBON page parameters are described in Continuous Controller Parameters on page 7 ‐ 30.
Parameter Range of Values Default
Destination Control Destination List MIDI21
Scale ± 300% 100%
Add -128 to +127 0
Curve Linear, Compress, Expand Linear
Entry Value None, 0 to 127 None
Exit Value None, 0 to 127 None