Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 52 / 448

4 Machine description
4.14 Description of functions of electric twine empty display for lower twine
52
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
BPG000-020
The large-square baler is equipped with twine boxes on both machine sides. Each twine box is
capable of holding 16 twine rolls. Of these, the twine rolls identified with an “R” are spare rolls.
The 3 upper twines come from the 6 twine rolls (1) in the front.
The 3 lower twines come from the 9 twine rolls (2) in the rear.
During the baling process, each of the 6 knotters is fed with an upper twine and a lower twine.
The knotters are fed with 3 upper twines and 3 lower twines on each machine side.
The lower twine is provided with more twine rolls since it needs more twine for reaching around
the underside and both ends of the big bale. In contrast to that, the upper twine only reaches
around the upper side of the big bale.
„
In order to ensure sufficient tying safety, make certain that only synthetic twines with a
running length of 100 – 130 m/kg are used.
„ Only use KRONE original twine.
4.14 Description of functions of electric twine empty display for lower
twine
BP000-068
If the end of the lower twine is reached or has been torn, the stretching twine tensioners (1)
come to rest on the angle of rotation (2). An acoustic warning signal sounds on the terminal and
an error message is shown on the display of the terminal. The acoustic warning signal can be
switched off while the twine is threaded in,
refer to page 299 .