Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 119 / 448

Operation 9
Operating the bale ejector 9.15
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en 119
If baling flaps are released
„
Press in order to execute 10 bale ejections.
„ Repeat the process until all tied big bales are out of the bale channel.
„
Pull down the last big bale manually standing laterally next to the bale chute.
Via momentary switches
BP000-138
ü The bale chute is lowered refer to page 115 .
„
Switch off the PTO shaft and wait until trailing machine parts have come to a complete stop.
„ Secure tractor against rolling away.
„
Apply the parking brake ( refer to page 121 ) and the flywheel brake ( refer to page 100 ) of
the machine.
„ Without “Load Sensing” version: Actuate the control unit ( ).
The momentary switch (1) has several functions.
If baling flaps have not been released
„
In order to release the baling flaps, press the momentary switch (1) once.
If baling flaps are released
„
In order to execute 10 bale ejections, press the momentary switch (1).
Moving bale ejector backwards
„
Keep the momentary switch (1) pressed until the bale ejector has moved backwards.
Moving bale ejector forwards
„
Keep the momentary switch (2) pressed until the bale ejector has moved forwards.
„
Move the bale ejector backwards/forwards until the bale channel is empty.
„ When the big bale is ejected, move the bale ejector back to the front.