Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 274 / 448

18 Maintenance - Lubrication
18.1 Lubricating universal shaft
274
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
18 Maintenance - Lubrication
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
„
To avoid accidents, the relevant safety instructions must be read and observed, refer to
page 14 .
WARNING
Risk of injury due to non-observance of safety instructions
If the relevant safety routines are not observed, persons may be seriously injured or killed.
„ The safety routines must be read and observed to avoid accidents, refer to page 26 .
NOTICE
Environmental damage caused by consumables
If consumables are not stored and disposed of properly, they may escape into the
environment. As a result, the environment will be damaged, even by small quantities.
„
Store the consumables in suitable containers according to the statutory provisions.
„ Dispose of used consumables according to statutory provisions.
NOTICE
Damage to bearing points
When using lubricating greases not approved and when mixing different lubricating greases,
the lubricated parts may be damaged.
„
Only use approved lubricating greases, refer to page 62 .
„ Do not use graphite-containing lubricating greases.
„
Do not mix different lubricating greases.
18.1 Lubricating universal shaft
Main drive universal shaft Universal shaft flywheel
DVG000-001
ü The machine is shut down and safeguarded, refer to page 26 .
„
Lubricate the universal shaft with multi-purpose grease at the intervals indicated in the table.