Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 258 / 448

16 Settings
16.26 Setting the cutting length
258
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
Lowering
„
Press and hold .
Alternatively, the blade cassettes can be lowered via the external momentary switches.
Releasing the single blade locking device
ü
The machine is shut down and safeguarded, refer to page 26 .
„
Attach the auxiliary tool (1) to the upper or/and lower blade group control system (2, 3).
WARNING! Risk of injury due to spring pressure on the auxiliary tool! Do not release the
special tool too soon.
„
Turn the special tool (1) until the cams on the upper and lower blade group control system
are in position ( ).
Pulling out blade cassette
„
In order to pull out the blade cassette (5), unlock the locking lever (6) and pull out the blade
cassette sideways as far as the stop.
Unlocking the blade control shaft
„
Switch the locking lever (7) in position ( ).
Removing/inserting blades
WARNING! Danger of being cut by sharp blades! Wear suitable protective gloves.
„ Remove the blade (4) vertically upwards.
„
Insert the new blade vertically from above.
Locking blade control shaft
„
Switch the locking lever (7) in position ( ).
„ Push in the blade cassette (5) until the locking lever (6) catches in place.
„
Insert the auxiliary tool (1) into the holder on the machine.
Lifting blade cassette
For “Comfort 1.0” version
„ Actuate the control unit ( ) on the tractor until the blade cassette has been
fully lifted.