Krone Big Pack 1270 XC, Оригинальная инструкция по эксплуатации

Страница: 118 / 448

9 Operation
9.15 Operating the bale ejector
118
BiG Pack 1270 XC
Original Operating Instructions 150000748_01_en
Moving bale ejector backwards
„
With the safety sleeve (4) tightened, move the lever (5) to position (II) and hold it until the
bale ejector has moved backwards.
„
When the big bale has been ejected, move the bale ejector back to the front.
„
Close the stop cocks (2) and (3).
Moving bale ejector forwards
„
With the safety sleeve (4) tightened, move the lever (5) upwards to position (I) and hold it
until the bale ejector has moved completely to the very front.
„
Move the bale ejector backwards/forwards until the bale channel is empty.
„
Close the stop cocks (2) and (3).
For “Comfort 1.0” version
Via terminal
BP000-137
ü
The bale chute is lowered, refer to page 115 .
„
Switch off the PTO shaft and wait until trailing machine parts have come to a complete stop.
„ Secure tractor against rolling away.
„
Apply the parking brake ( refer to page 121 ) and the flywheel brake ( refer to page 100 ) of
the machine.
„ Without “Load Sensing” version: Actuate the control unit ( ).
The key has several functions.
If baling flaps have not been released
„
Press in order to release the baling flaps.